Personal Information:

Name: Omar Rafae Mahmood Alomar

Date and Place of Birth:
07.09.1979 at Mosul, Iraq

Nationality:
Iraqi

Privet Email:
sedrarasha@yahoo.com

University Email:
Omar.alomar@ntu.edu.iq

Mobile Number:
+9647517678865

Academic Degrees:

PhD, Mechanical Engineering and Thermal Engineering   (10/2011 to 09/2016)

Institute of Thermal Engineering, TU Bergakademie Freiberg, Germany

• Thesis Topic: Modeling and simulation of complete liquid-vapor phase change process inside porous media

Classification: 90-95% (magna cum laude)

Area of Specialization: Mechanical Engineering and Thermal Engineering

Adviser: Prof. Dr.-Ing. Dimosthenis Trimis (TU Freiberg and KIT, Germany)

Co-Adviser: Prof. Dr. Subhashis Ray (TU Freiberg, Germany)


M.Sc., Mechanical Engineering   (10/2001 to 1/2004)

Mechanical Engineering department, University of Mosul, Iraq

Thesis Topic: Numerical Study of Inertia Effect on Natural Convection in a Horizontal Porous Cavity

Classification: Very good

Area of Specialization: Thermal Engineering

Advisor: Assistant Prof. Dr. Amir Sultan Dawood (University of Mosul, Iraq)


B.Sc., Mechanical Engineering   (10/1997 to 7/2001)

Mechanical Engineering department, University of Mosul, Iraq

Classification: Good

Area of Specialization: General Mechanical Engineering

Honors and Awards:

• Collaborative Research Center (SFB920) Scholarship, October 2015

• DAAD Scholarship, October 2011 – September 2015

• Elsevier Ltd Certificates for reviewing papers, 2014 – 2021

• Thanks and appreciation certificates from the Dean of Engineering Technical College of Mosul (ETCM), 2006 – 2011

• Merit of Bachelor UOM (ranked 2nd in Mech. Eng. Graduation courses), 2001

• Editorial Board for six International Journals, 2018

• Thanks and appreciation certificates from the President of Northern Technical University (NTU), 2018, 2019 and 2020

• Thanks and appreciation certificates from the President of Northern Technical University (NTU), 2021

• Thanks and appreciation certificates from the President of Northern Technical University (NTU), 2022

• Thanks and appreciation certificates from the Minster of Higher Education and Scientific Affairs, 2021 and 2022.

Research Interests:

• Modeling and simulation of energy conversion systems

• Reactive flows and phase change process in porous and heterogeneous media

• Renewable and sustainable energy sources

• System optimization and uncertainty analysis

• Multi-mode heat and mass transfer in porous and heterogeneous media

• Algorithms and computational fluid dynamics (CFD) for simulation of complex multi-physical systems

• Nanofluids inside porous media

• Internal combustion engine and refrigeration and air-conditioning systems

Positions and Committees

• A member of several scientific and administrative committees at the university

• Head of Refrigeration and Air Conditioning Technology Engineering Department,2018

• Member of the Government Program Secretariat Committee, 2019

• Director of the government program at the Technical College of Engineering, Mosul,2019

• Director of Quality Assurance Division Office, 2020

• A member of several scientific and preparatory committees in the conferences held by the Northern Technical University, from 2020 to 2022

• Member of the Government Program Secretariat Committee, 2020

• Member of the Teaching Qualification Examination Committee, 2020

• Director of the Department of Quality Assurance and University Performance, 2020

• Chairman of the Accreditation Committee for Scientific Journals, 2020

• Director of the government program at the Northern Technical University, Mosul, 2021

• Editor-in-chief of the NTU Journal of Technology and Engineering Sciences at the Northern Technical University, 2021

• Director of the Department of Studies and Planning, 2021

Vice-Chancellor of President University for Scientific affairs, 2021 up to Now

RESEARCH EXPERIENCE

Scientific Researcher   (11/2005 to present)
Engineering Technical College of Mosul, Northern Technical University (NTU), Iraq

Topics: Engineering and Numerical Analysis; Heat and Mass Transfer;
Air-conditioning Systems; Engineering Control Systems

Main research activities:
– Give scientific courses for Undergraduate student
– Proposal writing for creation of new projects
– Measurement the discharge coefficient of orifice meter
– Measurement the diesel performance and emissions analysis
– Simulation of phase change problems in porous media
– Performance analysis of a hybrid (photovoltaic/thermal) solar collector system for residential applications in Iraq
– supervision of Master students
– Scientific committee member for International conferences

 

Scientific Researcher (SFB 920 Project)   (07/2016 to 10/2016)
Institute of Ceramic, Glass and Construction Materials, TU Bergakademie Freiberg, Germany

Topic: Numerical simulations in 2-phase and 3-phase systems using metal melt/
ceramic filter material

Main research activities: Detialed simulation of metal melt filtration in ceramic fomas

Adviser: Prof. Dr.-Ing. habil. Aneziris Christos G. (TU Freiberg, Germany)

 

PhD Researcher (SFB 920 Scholarship)    (10/2015 to 09/2016)
Institute of Thermal Engineering, TU Bergakademie Freiberg, Germany

Topic: Modeling and simulation of two-phase flow and phase change process inside
porous media

Advisor: Prof. Dr.-Ing. Dimosthenis Trimis (TU Freiberg and KIT, Germany)

Co-Advisor: Prof. Dr. Subhashis Ray (TU Freiberg, Germany)

Note: SFB 920 Scholarship is the international scholarship for PhD-Students in terms
of the Integrated Research Training Group of the Collaborative Research Center SFB920 (CRC 920) at the Faculty of Mechanical, Process and Energy Engineering, TU Freiberg, Germany

 

PhD Researcher (DAAD Scholarship)    (10/2011 to 09/2015)
Institute of Thermal Engineering, TU Bergakademie Freiberg, Germany

Topic: Phase change problems inside porous media

Advisor: Prof. Dr.-Ing. Dimosthenis Trimis (TU Freiberg and KIT, Germany)

Co-Advisor: Prof. Dr. Subhashis Ray (TU Freiberg, Germany)

Note: Exchange DAAD Scholarship is one of the best international scholarship for
PhD-Students in the world

 

Graduate Researcher   (10/2001 to 1/2004)
Mechanical Engineering department, University of Mosul, Iraq

Topic: Non-Darcian flow inside porous media

Adviser: Assistant Prof. Dr. Amir Sultan Dawood (Mosul University, Iraq)
Undergraduate Researcher (10/2000 to 7/2001)
Mechanical Engineering department, University of Mosul, Iraq

Topic: Types of nuclear reactors

Adviser: Assistant Prof. Ahmed Alsabha (Mosul University, Iraq)

TEACHING EXPERIENCE

Teaching Courses

Bachelor

Heat and mass Transfer, Bachelor, NTU (coordinator)   (2017 to present)

• Engineering and Numerical Analysis, Bachelor, NTU (coordinator)   (2005 to present)

Engineering Control Systems, Bachelor, NTU (coordinator)   (2008 to 2010)

Refrigeration and Air Conditioning Systems, Bachelor, NTU (coordinator)   (2006 to 2009)

Transport Phenomena Using CFD, Master, TU Freiberg (assistant) (2015 to 2016)

• Process Modeling, Bachelor, TU Freiberg (assistant)   (2015 to 2016)

 

Higher Diploma

Advanced Numerical Analysis, Higher Diploma, NTU (coordinator)   (2020 to present)

Thermal System Design, Higher Diploma, NTU (coordinator)   (2020 to present)

 

Student Supervision

Bachelor

• Supervisor for more than 30 students within different topics in the field of Thermal
engineering, Engineering Technical College of Mosul, NTU (2005 to present)

Higher Diploma

• Supervisor of 2 student in the field of Mechanical engineering, engineering Technical College
Mosul, NTU (2021 to present)

Master

• Supervisor of 7 student in the field of Thermal engineering, Technical College Kurkuk, NTU
(2019 to present)

Doctoral

• Supervisor of 1 student in the field of Thermal engineering, USM, Malaysia
(2022 to present)

PROJECT EXPERIENCE

Collaborative Research Center 920    (10/2015 to 10/2016)

Title: Multi-Functional Filters for Metal Melt Filtration – A contribution towards Zero Defect Materials

Supported by: German Research Foundation (DFG)

Partners: 9
Duration: 36months
Budget: 3.8 million euro

MANAGEMENT EXPERIENCE

Projects

• Proposal writing:

– Prediction of complete liquid-vapour phase change process inside real porous media (DFG)    (2016)

Courses/workshops: (All the courses with certificates)    (2011 to 2015)

– Quality Management, TU Freiberg, Germany
– Assessment Center, TU Freiberg, Germany
– Leading and Working in Teams , TU Freiberg, Germany
– Managing Academic Presentations, TU Freiberg, Germany
– Time and Stress Management, TU Freiberg, Germany
– Project Management Focusing on the own doctoral studies, TU Freiberg, Germany
– Basics of Team Development, TU Freiberg, Germany

PUBLICATIONS

Complete list of journal and conference publications (provided at the end of this document)

Citation Report from Scopus and Google Scholar (on 1/03/2021)

Subject areas: Physics, Engineering, Energy, Chemical Engineering
Documents: 45
Sum of Times cited: 588
Co-authors: 35
h-index: 16
RI Score: 374

SCIENTIFIC COMMUNITY

Reviewer for international journals:

• International Journal of Thermal Sciences, Elsevier
• International Journal of Multiphase Flow, Elsevier
• Case Studies in Thermal Engineering, Elsevier
• Applied Thermal Engineering, Elsevier
• Solar Energy, Elsevier
• International Journal of Heat and Mass Transfer, Elsevier
• Flow Measurement and Instrumentation, Elsevier
• International Journal of Mechanical Sciences, Elsevier
• Aerospace Science and Technology, Elsevier
• Energy Research & Social Science, Elsevier
• Applied Energy, Elsevier
• Chemical Engineering and Processing: Process Intensification, Elsevier
• Sustainable Energy, Grids and Networks, Elsevier
• Transport in Porous Media, Springer
• Journal of Mechanical Science and Technology, Springer
• Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer
• Journal of Heat and Mass Transfer, Springer
• Environment, Development and sustainability, Springer
• Environmental Science and Pollution Research, Springer
• Heat Transfer Engineering, Taylor and Francis Ltd.
• International Journal of Ambient Energy, Taylor and Francis Ltd
• International Journal of Energy Research, Wiley
• IEEE Conferences
• International Journal of Research and Scientific Innovation
• Journal of Environmental science and Management
• Journal of Solar Energy and Sustainable Development
• Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
• International Journal of Mechanical Engineering and Robotics Research

 

Editorial board for international journals:

• SCIREA Journal of Mechanical Engineering
• SCIREA Journal of Energy
• International Journal of Mechanical Engineering and Applications
• International Journal of Research and Engineering
• International Journal of Research in Advanced Engineering and Technology
• International Journal of Latest Technology in Engineering, Management & Applied Science

 

Manger Editor:
• NTU Journal of Engineering and Technology

KEY SKILLS

Research

• Extensive knowledge of applied mathematics (integral-differential equations, numerical
methods, uncertainty quantification analysis, linear stability analysis, optimization)
• Extensive knowledge of system modeling and simulation (CFD, parallel computation,
dynamic modeling and control)
• Extensive knowledge of energy conservation systems (phase change process in
porous media, multi-mode heat transfer, biodiesel and solar energy)
• Knowledge of combustion experiments (characteristics of engine performance and
emissions analysis)

Social and Scientific Activities

• Member of the Iraqi Engineers Union
• Member of the Iraqi Association of University Lecturers
• Member of the online CFD group
• Membership in International Association for Mathematical Geosciences (IAMG) – Houston, USA from 2013 up till now
• Membership in Science and Engineering Institute (SCIEI), 2018.
• International Solar Energy Society, 2019

Academic Courses

I have attended many academic courses at TU Freiberg from 2011 to 2016 (All the courses with certificates).

• Introduction to Computer Programming with MATLAB
• Scientific Working and Writing for International Doctoral Student
• Compiling Academic Papers
• Improved Reading

Scientific Courses

I have attended three intensive scientific courses at TU Freiberg (All the courses with certificates).
• Transport Phenomena using CFD
• Phase Change Heat Transfer
• Process Modeling

Information and Technology

• Operating systems: WINDOWS, LINUX
• Software: Microsoft office packages, LaTex, TECPLOT, GUN packages, CAD,
Statistic analysis and CFD softwares
• Programming: FORTRAN, MATLAB

Languages

• Arabic (Mother tongue)
• English (Very good)
• German (Good; finished level B1)

Problem Solving

• Working across distinct areas of phase change problems in porous media, demonstrated
independent thought in analyzing problems, adopting suitable strategies and developing
new techniques to deal with high discontinuity in the diffusion coefficient

LIST OF PUBLICATIONS

Journal Publications

• O. R. Alomar, I. A. Mohamed, Numerical investigation of boundary surface effects on
natural convection in a horizontal porous cavity by using non-Darcian flow, AlTAQANI Journal, 26 (5) (2013) 9-30.
• O. R. Alomar, M.A.A. Mendes, D. Trimis, S. Ray, Simulation of complete liquidvapor phase change inside divergent porous evaporator, Int. J. of Materials, Mechanics
and Manufacturing, 2 (3) (2014) 223-229.
• O. R. Alomar, M.A.A. Mendes, D. Trimis, S. Ray, Numerical simulation of complete
liquid-vapour phase change process inside porous media using smoothing of diffusion
coefficient, Int. J. of Thermal Sciences, 86 (2014) 408-420.
• O. R. Alomar, M.A.A. Mendes, D. Trimis, S. Ray, Simulation of complete liquidvapour phase change process inside porous evaporator using local thermal non-equilibrium model, Int. J. of Thermal Sciences, 94 (2015) 228-241.
• O. R. Alomar, D. Trimis, S. Ray, Numerical simulation of complete liquid-vapour
phase change process inside an annular porous evaporator, International University of
Resources, Scientific Reports on Resource Issues, 1 (2015) 128 – 133.
• S. Ray, O. R. Alomar, Simulation of liquid-vapour phase change process inside porous
media using modified enthalpy formulation, Int. J. of Thermal Sciences, 105 (2016)
123-136
• O. R. Alomar, M.A.A. Mendes, D. Trimis, S. Ray, Numerical simulation of complete
liquid-vapour phase change process inside porous Media: A comparison between local
thermal equilibrium and non-equilibrium models, Int. J. of Thermal Sciences, 112
(2017) 222 – 241.
• O. R. Alomar, M.A.A. Mendes, S. Ray, D. Trimis, Numerical investigation of
complete evaporation process inside porous evaporator using staggered and nonstaggered grid arrangements, Int. J. of Thermal Sciences, 129 (2018) 56 – 72.
• O. R. Alomar, R. R. Mohammed, M.A.A. Mendes, S. Ray, D. Trimis, Numerical
Investigation of Two-Phase Flow in Anisotropic Porous Evaporator, Int. J. of
Thermal Sciences, 135 (2019) 1 – 16.
• O. R. Alomar, R. R. Mohammed, K. H. Mohammed, Numerical Investigation of
Boiling and Forced Convection Heat Transfer in Inclined Porous Enclosure using
Modified Enthalpy Formulation, MATEC Web of Conferences, 240 (2018) 01001.
• K. H. Mohammed, O. R. Alomar, R. R. Mohammed, Effects of Different Biodiesel on
Diesel-Engine Performance and Emissions, IEEE Xplore, (2018) 468 – 473.
• H. M. Abd, O. R. Alomar, I. A. Mohamed, Effects of Varying Orifice Diameter and
Reynolds Number on Discharge Coefficient and Wall Pressure, Flow Measurements
and Instrumentation, 65 (2019) 219-226.
• O. R. Alomar, Analysis of Variable Porosity, Thermal Dispersion, and Local Thermal
Non-Equilibrium on Two-Phase Flow inside Porous Media, Applied Thermal
Engineering, 154 (2019) 263 – 283.
• O. M. Hamdoon, O. R. Alomar, B. M. Salim, Performance Analysis of Hybrid
Photovoltaic Thermal Solar System in Iraq Climate Condition, Thermal Science and
Engineering Progress, 17 (2020), 100359.
• M. M. Salih, O. R. Alomar, F. A. Ali, H. M. Abd, An Experimental Investigation of a
Double Pass Solar Air Heater Performance: A Comparison between Natural and
Forced Air Circulation Processes, Solar Energy, 193 (2019) 184-194.
• H. M. Abd, O. R. Alomar, F. A. Ali, M. M. Salih, Experimental Study of Compound
Parabolic Concentrator with Flat Plate Receiver, Applied Thermal Engineering, 166
(2020) 114678.
• O. R. Alomar, B. M. Salim, O. M. Hamdoon, Analysis of Two-Phase Flow in a
Double-Pipe Heat Exchanger Filled with Porous Media, Int. J. of Heat and Mass
Transfer, 156 (2020) 119799.
• O. R. Alomar, Numerical Investigation of Two-Phase Flow in a Horizontal Porous
Evaporator with Localised Heating using Non-Darcian Flow and Two Equations
Model, J. of Heat and Mass Transfer, 56 (4) (2020) 1203-1221.
• O. R. Alomar, N. M. Basheer, A. A. Yousif, Analysis of effects of Thermal NonEquilibrium and Non-Darcy Flow on Natural Convection in a Square Porous
Enclosure Provided with a Heated L Shape Plate, Int. J. of Mechanical Sciences, 181
(2020) 105704.
• H. N. S. Yassien, O. R. Alomar, H. M. Abd, Performance analysis of triple-pass solar
air heater system: Effects of adding a net of tubes below absorber surface, Solar
Energy, 207 (2020) 813-824.
• O. R. Alomar, N. M. Basheer, A. A. Yousif, Natural Convection Heat Transfer from a
Bank of Orthogonal Heated Plates Embedded in a Porous Medium using LTNE
model: A Comparison between In-line and Staggered Arrangements, Int. J. of
Thermal Sciences, 160 (2021) 106692.
• O. R. Alomar, Transient Behaviour of Heat transfer with Complete Evaporation
Process in Porous Channel with Localised Heating using Non-Darcian Flow and
LTNE model, J. of Heat and Mass Transfer, (2021).
• O. R. Alomar, I. A. Mohamed, Q. A. Yousif, H. M. Abd, A Thermal Non-Equilibrium
Model to Natural Convection inside non-Darcy Porous Layer Surrounded by
Horizontal Heated Plates with Periodic Boundary Temperatures, Journal of Heat
Transfer, 50 (6) (2021) 6068-6098.
• Mohammed Hadi Ali, Haitham M. Wadallah, Mohsen Abaid Ibrahim, O. R. Alomar,
Improving the Microstructure and Mechanical Properties of Aluminium Alloys Joints
by adding SiC Particles during Friction Stir Welding Process, Metallography,
Microstructure, and Analysis, 10(3) (2021) 302-313.
• M. M. Salih, O. R. Alomar, N. S. Yassien, Impacts of Adding Porous Media on
Performance of Double-Pass Solar Air Heater under Natural and Forced Air
Circulation Processes, International Journal of Mechanical sciences, 210 (2021)
106738.
• O. M. Ali, O. R. Alomar, Mixed Convection Heat Transfer from Two Aligned
Horizontal Heated Cylinders in a Vented Square Enclosure, Thermal Science and
Engineering Progress 25 (2021) 101041.
• O. R. Alomar, O. M. Ali, Energy and exergy analysis of hybrid photovoltaic thermal
solar system under climatic condition of North Iraq, Case Studies in Thermal
Engineering, 28 (2021) 101429.
• O. M. Ali, O. R. Alomar, O. M. Ali, A. Naseer T., Y. Salam J., A. Nayyar, S. Askar,
M. Abouhawwash, Operating of Gasoline Engine Using Naphtha and Octane
Boosters from Waste as Fuel Additives, Sustainability, 13 (23) (2021) 13019.
• A. A. Yousif, O. R. Alomar, A. T. Hussien, Impact of using triple adiabatic obstacles
on natural convection inside porous cavity under non-darcy flow and local thermal
non-equilibrium model, Int. Communications in Heat and Mass Transfer, (2021).
• Sabhan H. Ali, O. R. Alomar, O. M. Ali, Energetic and exegetic performance analysis
of flat plate solar collector under variables heat transfer coefficient and inlet water
temperature, Case Studies in Thermal Engineering, 28 (2021) 101700.
• N. M. Basher, O. R. Alomar, I. A. Mohmed, Impact of using single heated obstacle on
natural convection inside porous cavity under non-Darcy flow and thermal nonequilibrium model: A comparison between horizontal and vertical heated obstacle
arrangements, Int. Communications in Heat and Mass Transfer, 133 (2022) 105925.
• A. N. Mustafa, O. M. Ali, O. R. Alomar, Effect of Heavy Fuel Combustion in a Gas
Power Plant on Turbine Performance: A Review, International Journal of Design &
Nature and Ecodynami, 17 (1) (2022) 105-111.
• O. R. Alomar, H. M. Abd, M. M. Salih,, Firas A. Ali, Performance Analysis of Pelton
Turbine under Different Operating Conditions: An Experimental Study, Ain Shams
Engineering Journal, 13 (4) (2022) 101684.
• O. R. Alomar, Sami R. Aslan, Farah G. Zaki, Modelling and simulation of two-phase
flow inside porous pipe evaporator using Cu-Water nano-fluid, Int. J. of Thermal
Sciences, 175 (2022) 107462.
• H. M. Abd, O. R. Alomar, M. M. Salih, Improving the performance of solar air heater
using a new model of V-corrugated absorber plate having perforations jets,
International Journal of Energy Research, 46 (6) (2022) 8130-8144.
• O. M. Ali, O. R. Alomar, S. I. Mohamed, Technical, Economical and Environmental
Feasibility Study of a Photovoltaic System under Climatic Condition of North Ira,
International Journal of Ambient Energy, (2022).
• A. A. Al-Attar, O. R. Alomar, M.K. Yousif, Importance of scientific research for
Achieving Sustainable Development Goals during Covid19 Pandemic: Northern
Technical University – A Case Study, Joural of Sustaiability Prespective, 2 (2022)
341 – 346.
• O. R. Alomar, M. M. Salih, H. M. Abd, Efficiency enhancement of solar air heater
collector by modifying jet impingement with v-corrugated absorber plate, Journal of
Energy Storage, 55 (2022) 105535.
• A. A. Badr, O. K. Ahmed, O. R. Alomar, A review of Atmospheric Vortex Engine
Generated by Solar Air collector, NeuroQuantology. 20 (6) (2022) 5912 – 5935.
• O. M. Ali, O. R. Alomar, Technical and Economic Feasibility Analysis of a PV GridConnected System Installed on a University Campus in Iraq, Environmental Science
and Pollution Research, (2022)
• O. R. Alomar, R. H. Saaeed, O. M. Ali,, Impact of size and location of outflow
opening vent on mixed convective heat transfer induced by two aligned heated
cylinders immersed in a partially open channel, Heat Transfer, (2023).
• O. R. Alomar, M. M. Salih, H. M. Abd, Performance Analysis of Single-Pass Solar
Air Heater Thermal Collector with Adding Porous Media and Finned Plate, Energy
Storage (2023).

Journal Publications (Submitted/Awaiting/Accepted)

• O. R. Alomar, H. M. Abd, H. N. S. Yassien, Performance Analysis of Discharge Coefficient
of Venturimeter under different Geometric Configurations and High Reynolds number, Ain
Shams Engineering Journal, paper submitted for publication (2022)
• O. M. Ali, R. H. Daaeed, O. R. Alomar, Mixed Convective Heat Transfer Induced by Two
Aligned Horizontal Cylinders in a Ventilated Enclosure under Various Location and Size
of Upper Opening Vent, Thermal Science and Engineering Progress, paper submitted for
publication (2022).
• O. R. Alomar, O. M. Ali, O. M. Ali, Numerical Investigation of Natural Convection Induced
by Heated Circular Cylinder inside Square Duct Cooled from One Side at Different
Temperatures, Case Studies in Thermal Engineering, paper submitted for publication (2022)
• O. R. Alomar, M. M. M. Salih, H. M. Abd, Performance Analysis of Single-Pass Solar
Air Heater Thermal Collector with Adding Porous Media and Finned Plate, Solar
Energy, paper submitted for publication (2022)

Conference Publications

• O. R. Alomar, Convective heat transfer investigation of non-Darcian flow structure in a
rectangular porous cavity, Proceedings of the 11th Scientific Conference for Foundation of
Technical Education, Technical College of Baghdad, Iraq, 2009.
• O.R. Alomar, M.A.A. Mendes, D. Trimis, S. Ray, Simulation of complete liquid-vapor phase
change inside divergent porous evaporator, 3rd International Conference on Fluid Dynamics
and Thermodynamics Technologies (FDTT 2014), Antalya, Turkey, April 21 – 23, 2014.
• O.R. Alomar, D. Trimis, S. Ray, Numerical simulation of complete liquid-vapour phase
change process inside an annular porous evaporator, 10th International Conference on
Freiberg-St. Petersburg Colloquium of Young Scientists, Freiberg, Germany, June 17 – 19 ,
2015 .
• O. R. Alomar, R. R. Mohammed, K. H. Mohammed, Numerical Investigation of Boiling and
Forced Convection Heat Transfer in Inclined Porous Enclosure using Modified Enthalpy
Formulation, 11th International Conference on Computational Heat, Mass and Momentum
Transfer, Poland , 2018.
• K. H. Mohammed, O. R. Alomar, R. R. Mohammed, Effects of Different Biodiesel on DieselEngine Performance and Emissions, International Conference on Advanced Science and
Engineering, Duhok, Iraq, October 2018.
• O. R. Alomar, I. A. Mohamed, Q. A. Yousif, Numerical Simulation of Natural Convection and
Radiation on Performance of uniform Fins Geometry, 2nd International Conference on
Advanced Science and Engineering, Duhok, Iraq, April 2019.
• Q. A. Yousif, O. R. Alomar, I. A. Mohamed, M. K. Najim, Evaluation Optimal Friction Factor
Correlation in Turbulent Pipe Flow by Genetic Algorithm, 2020 International MultiDisciplinary Conference Theme: “Sustainable Development and Smart Planning”, Antalya,
Turkey, 28 – 30 June (2020).
• O. R. Alomar, I. A. Mohamed, Q. A. Yousif, Analysis of Two-Phase Flow inside Porous
Diffuser, 2020 International Multi-Disciplinary Conference Theme: “Sustainable
Development and Smart Planning”, Antalya, Turkey, 28 – 30 June (2020).

Conference (Submitted/Awaiting/Accepted)

• M. A. Mahmood, O. R. Alomar, M. M. M. Salih, K. H. Mohammed, An Experimental Study
on Performance Analysis of Solar Water Distiller System Using Extended Fins under Iraq
Climatic Conditions, 1
st International Conference on Sustainable Development Techniques,
Mosul, Iraq, June 2022.
• S. M. Najm, O. R. Alomar, O. M. Ali, Simulation of a Gasoline Engine Performance and
Thermal Efficiency at Variables Compression Ratio, 1
st International Conference on
Sustainable Development Techniques, Mosul, Iraq, June 2022.
• A. N. Mustafa, O. M. Ali, O. R. Alomar, Economic evaluation of the different fuel types
utilization in Qayyarah gas power plant, 1
st International Conference on Sustainable
Development Techniques, Mosul, Iraq, June 2022.
• A. A. Bader, O. K. Ahmed, O. R. Alomar, Experimental Assessment of Performance For
Atmospheric Vortex Engine, 1
st International Conference on Sustainable Development
Techniques, Mosul, Iraq, June 2022.

Books

• O. R. Alomar, Modeling and simulation of complete liquid-vapor phase change process inside
porous media, Cuvillier Verlag, Göttingen, Deutschland, 2016.

USEFULL LINKS
REFERENCES

Available upon request